Short Description: Specifies information for modems connected to the ports you set in the Ports dialog box.
Description:
Default value:
Depends on the modem type selected.
Server and Workstation
Detailed information for the notes.ini Keyword:
COM3
Short Description: Specifies information for modems connected to the ports you set in the Ports dialog box.
Description:
Specifies information for modems connected to the ports you set in the Ports dialog box. You can define up to five ports (COM1 through COM5).
These parameters are valid:
Parameter | Specifies | Required? |
driver | Driver name | Yes |
unit_ID | Unit ID | Yes |
max_sessions | Maximum number of concurrent sessions | Yes |
buffer_size | Size of buffer in kilobytes | Yes |
flags | Flags, such as secured channel, log modem I/O, enable RTS/CTS, and so on | No |
modem_speed | Modem speed | No |
modem_volume | Modem volume and dialing mode | No |
modem_filename | Name of the modem command file | No |
dial_ timer | Connection time-out in seconds | No |
hangup_timeout | Idle hang-up time in minutes | No |
Unless you are experienced with modems and ports, use the user-interface to configure ports.
Depends on the modem type selected.
Syntax:
COM3=parameter1, parameter2, ...
COM3=parameter1, parameter2, ...
UI equivalent:
File - Preferences - Notes Preferences - Ports dialog box
Applies to:File - Preferences - Notes Preferences - Ports dialog box
Server and Workstation
Valid for version:
5.0.0
5.0.0
Documented in:
Lotus Domino Administrator 5 Help
Lotus Domino Administrator 5 Help
Entry created by:
IBM Documentation
IBM Documentation