Detailed information for the notes.ini Keyword: 

Debug_show_sem


Short Description: enable/disable semaphore diagnostic trace messages.

Description:
The DEBUG_SHOW_SEM setting in notes.ini can be set to enable semaphore diagnostic trace messages. DEBUG_SHOW_SEM=1 to enable the tracing. DEBUG_SHOW_SEM=0 to disable the tracking. The default state is 'disabled'.

Default:
When absent or set to 0 the default behavior is to not generate these diagnostic trace messages.

Recommendation:
This setting (almost) never be used. Leaving it disabled will provide a slight performance improvement. This setting should only be enabled for data gathering under instruction from field/support personnel. When debugging semaphore problems it's handy to have this setting enabled.





Default value:
None

Syntax:
Debug_show_sem=0 / 1

Example:
Debug_show_sem=0

UI equivalent:
None


Applies to:
Server